A high performance, chemically cured, waterborne epoxy rust inhibitive Primer for use over properly prepared interior or exterior steel or aluminium surfaces. Also used over concrete, masonry, glazed brick or excellent adhesion, corrosion resistance, and good resistance, spillage or fumes of a wide range of chemicals.

Can be overcoated with epoxy, urethane, alkyd or latex coatings Light gray color permits good coverage with first finish coat. Not recommended for use on galvanized metal.

• Excellent adhesion
• Excellent corrosion resistance
• Lead free pigmentation
• Light gray color permits good finish coat hiding

• Excellent recoatability with various types of finishes
• Low order and a high flash point
• Low VOC
• Suitable on use on properly prepared concrete floors

• Epoxy Polyamide Resin
• Titanium Dioxide and Extender Pigments
• Not formulated with lead or Mercury containing Materials

Color: Light Gray
Finish: Flat
Pot Life: 8 hours 60-80°F (16-27°c)
Clean up Solvant: Soap and Water
Density: 11.4 lbs./gal. (1.37 kg/L) - mixed
Recommended Film Thickness: 2.0-3.0 mils dry -
4.0-6.0 mils wet.
Service Temperature Limits: 250°F (121°C) in air
VOC: 1.61 lbs./gal. (193 g/L) - mixed
Solids: Volume - 47% + 2% - mixed

Practical Coverage: Apply at 200-270 sq.ft. per
gallon (5-7m² /L) or 6.0 mils wet (3.0 mils
dry) on steel. Apply at 270-400 sq.ft. per
Gallon (7-10m² /L) or 4.0 mils wet (2.0
mils dry) on other surfaces. Make
fallowances or overspray loss and
irregular surfaces.
Flash Point: Over 200°F (93°C)
Dry Time @ 77°F (25°C) & 50% RH:
To touch - 2 hours
To recoat - Overnight up to one week
Shelf Life: Over 1 year